Jamaal Sawayn
They are perfect! The quality is great, the logo is clear. I like that they are in black color, perfectly fits with black door panels. Low price for good quality product. Fast shipping. It took about 7 minutes to replace the lights.
Model S · Model 3 · Model X · Model Y
Projecteurs de portes Teslahubs™
$29.99
$39.99
Save $10.00
- Laser-engraved glass lens — not a printed plastic film
- Plugs into the factory connector: no wiring, no drilling
- About 5 minutes a door, trim tool included so nothing gets scratched
- Two doors or all four — all four run at full brightness
- White or red projection
- Aluminium housing, IP67, rated 50,000 hours
- Fits Model S, 3, X and Y
- ShippingFree · 1–7 workdays
- Returns30 days, no questions
- Support24/7 · manual in the box
The fade
Most puddle lights are a printed sheet of plastic.
The LED sits directly behind the image. Heat does to plastic film what you would expect it to do: the logo goes soft, then blurry, then it is just a bright smudge on the tarmac. Owners usually notice around the second month.
What we do instead
The image is laser-engraved into a glass lens. Glass does not care about LED heat, so the projection stays as sharp on year three as it was on day one.
The rear-door problem
Four lights, two of them dim.
Tesla's door circuit gives each light a small, fixed amount of power. Units that pull more than that leave the rear pair dim or dark the moment all four doors are open — exactly when people are getting in.
What we do instead
The circuitry is matched to the factory draw, so a set of four behaves like a set of four.
Installation is very easy. Without any problems. Bought on 4 doors, everything works.
The question everyone asks
"Will these break my window?"
The story comes from faulty units that short the door circuit and confuse the window sensor. It is a real failure mode, and it is the reason to care what you plug in. Ours is built to the factory draw so the door electronics see what they expect to see.
I was nervous about the reviews regarding the windows not opening up on opening the door, but it works exactly as the factory lights. Excellent quality!
Glass
Laser-engraved lens instead of printed film
IP67
Aluminium housing, sealed against water and dust
50,000 h
Rated lifespan of the LED
Installation
5minutes a door. No wiring, no drilling, no mechanic.
- 01Pop the old light out with the included trim tool
- 02Unplug it from the factory connector
- 03Plug the new one in
- 04Click it back into the panel
Against the cheap ones
What actually differs
| Criterion | Midnight Glow | Typical low-cost units |
|---|---|---|
| Lens | Laser-engraved glass | Printed plastic film |
| What heat does to it | Nothing | Softens and blurs the image |
| Housing | Aluminium, IP67 | Plastic, sealing varies |
| Power draw | Matched to the factory circuit | Often higher — rear doors dim |
| Trim tool | Included | Usually not |
| Returns | 30 days | Varies by seller |
In the box
Everything that ships
-
01
Projector units
Two or four, in white or red, depending on what you choose above.
-
02
Trim removal tool
Non-marring, so the door panel comes away without scratches.
-
03
Installation manual
Four steps, printed. Support is on 24/7 if you get stuck.
Reviews
4.6
Josephine VonRueden
Works perfect, as expected. I was nervous about the reviews regarding the windows not opening up on opening the door, but it works exactly as the factory lights. Excellent quality!
Brendan Lockman
Norrm quality, Installation is very easy. Without any problems. Bought on 4 doors, everything works.
Francisca Blanda
Get the newest generation one really nice queen, clear graphic this photo really doesn't do it justice really great. Super easy install
Details
Specifications and questions
Specifications
- Fits
- Model S, Model 3, Model X, Model Y — choose your car above
- Lens
- Laser-engraved glass
- Housing
- Aluminium alloy, IP67 rated
- Lifespan
- Rated 50,000 hours
- Colour
- White or red projection
- Quantity
- Two units (front doors) or four units (all doors)
- Installation
- Plugs into the factory connector, about 5 minutes a door, no wiring or drilling
- In the box
- Projector units, trim removal tool, manual
Will this void my Tesla warranty?
No. The units use the same connector as the factory lights and change nothing in the car's wiring or software.
Will they affect my windows?
The window problem people read about comes from units that short the door circuit and confuse the window sensor. Ours is built to the factory power draw, so the door electronics behave normally. If anything is off, you have 30 days to send them back.
Do all four light up if I buy four?
Yes. That is what the matched power draw is for — with four fitted, the rear pair stays as bright as the front.
Is it hard to install?
Four steps per door and no tools beyond the trim tool in the box. Owners report five to ten minutes for a full set.
White or red?
White reads closest to the factory lighting. Red is the louder choice and shows up more on dark tarmac. Same unit otherwise, same price.
What if I don't like them?
Thirty days to return them, for any reason. Shipping is free both ways.
Every door opening, for the next fifty thousand hours.
$29.99 · Y / 2 articles + lumière blanche
- Free · 1–7 workdays
- 30 days, no questions
- 24/7 · manual in the box
$29.99
Y / 2 articles + lumière blanche
Stop Killing Your Tesla Battery
FREE today with every order: Tesla Battery Secrets — the shortcuts that can save you thousands.
Best sellers
TeslaHubs™ ProGuard : kit avancé de réduction du bruit et d'étanchéité
Prix promotionnelDu $79.99Prix habituel
$179.99
Épargnez $100
Teslahubs™ Space Box - CarPlay pour Y, 3, S, X, Cybertruck
Prix promotionnel$139.99Prix habituel
$299.00
Épargnez $159
Ensemble de rangement pour console centrale Teslahubs™, modèle 3/Y
Prix promotionnelDu $49.99Prix habituel
$59.99
Épargnez $10
Couvre-étriers en aluminium TeslaHubs™
Prix promotionnelDu $149.99Prix habituel
$300.00
Épargnez $150