Upgrade your Tesla's appearance with precision-fit aluminum caliper covers. Designed for your exact vehicle version, available in four standout colors, and easy to install at home in around 30 minutes.
Enjoy a sportier look without expensive brake modifications.

Your Tesla Looks Great. But Have You Noticed the Calipers?

You've chosen the wheels, kept your Tesla clean, and probably spent time making sure every detail looks just right. But take another look through the spokes. Those factory grey brake calipers can stand out for the wrong reason, especially against clean wheels and a carefully chosen exterior color.

It's a small detail, but one that can make the whole wheel area look less sporty than you'd like. Tesla's Performance models already show how much a bold brake color can change the appearance of a car. But upgrading to a more expensive trim just for that visual detail isn't exactly a practical solution.

The good news? You don't need a different Tesla to give yours a more distinctive, performance-inspired look. Sometimes, the right finishing touch makes all the difference.

Not All Tesla Models Are the Same. Check Your Fit Before Ordering.

At first glance, two Tesla Model Y vehicles may look almost identical. But underneath, their brake calipers and mounting configurations can be different.

The original Model Y, the refreshed Juniper (2025+), and vehicles produced at different factories may require different caliper cover designs. That's why choosing by model name alone isn't always enough. Your model year and production version matter, too.

Before ordering, take a moment to check your vehicle's configuration using the fitment guide below. You can also find your VIN on your vehicle registration or the B-pillar to help identify your production version. For Berlin-produced vehicles, look for the XP7 VIN prefix.

We'd rather help you confirm the right fit now than leave you with a product that doesn't match your brakes.

Find your version in 10 seconds

Match your Tesla below, then pick the same option when you order.

Your TeslaHow to tellChoose this option
Model 32017–2023 Original design, before the 2024 refresh Model 3
Model 3 Highland2024+ Refreshed design: slimmer headlights, new bumper. Every 2024+ Model 3 is a Highland Model 3 Highland
Model Y2020–2024 Original design: separate headlights, no light bar across the front Model Y
Model Y Juniper2025+ Full-width light bar across the front and rear Juniper (from 2025)
Model Y built in BerlinVIN starts with XP7 VIN starts with XP7 (on the windshield, in the car's software, or in the Tesla app) Model Y Berlin
Model S / Model X2018–2022 Check the model year on your registration S/X 2018-2022
Model S / Model X2023–2025 Check the model year on your registration S/X 2023-2025
BLACK FRIDAY
BLACK FRIDAY SALE

Teslahubs™ Aluminium Caliper Covers 

 For Tesla owners who want the Performance look — without the Performance price. 
Offer ends in: 00d 00h 00m 00s

BLACK FRIDAY — SAVE 55%

12,000+

Tesla Owners Upgraded

7

Tesla Versions. Designed for Their Exact Fit

30 min

Average DIY Installation Time

4

Colors to Match Your Style

Don't Buy Plastic. Don't Paint. Upgrade with Aluminum.

If you've looked into upgrading your Tesla's brake appearance, you've probably considered a few options. Plastic covers may seem like an affordable shortcut, but they can be more prone to fading, deformation, and wear over time.

Painting your factory calipers is another option, but it usually means scheduling a service appointment, leaving your car at a shop, and paying for a permanent modification. That's a lot of effort for a visual upgrade.

Our caliper covers offer a different approach. Made from aluminum and secured with a dual-clip locking system, they're designed to provide a secure fit while giving your wheels a more finished, performance-inspired appearance.

And unlike painting, they're removable. That's especially useful if you lease your Tesla or simply prefer upgrades that don't permanently change your original components.

Feature Teslahubs Typical Plastic Covers
Material Aluminum Plastic
Mounting Dual-Clip Lock Varies
Fitment Tesla-specific Often generic
Installation DIY, ~30 min Varies
Removable Yes Depends on design
Warranty Lifetime Varies

Pick Your Color. Install It Yourself in Around 30 Minutes.

You don't need a mechanic or a complicated installation appointment to give your Tesla this upgrade. Our caliper covers are designed with a straightforward DIY installation process, so you can take care of it right in your own garage.

Most owners can complete the installation in around 30 minutes using the included mounting hardware and tools. The covers are designed to fit over your compatible factory calipers, with a dual-clip locking system that helps keep them securely in place.

Just follow the installation instructions, take your time with each step, and make sure everything is properly secured before driving. It's a simple project that can make a noticeable difference in how your Tesla looks.

And when you're finished, you'll have a fresh, sportier look without having to modify or paint your original calipers.

What Tesla Owners Say About Caliper Covers

Daniel Stone

Verified customer

“The quality exceeded my expectations. They fit nicely, look clean, and give my Model Y a much sportier appearance.”

Joshua Roberts

Verified customer

“Installation was pretty straightforward and took me around 30 minutes. The result was absolutely worth it.”

David Barnes

Verified customer

“I always thought the stock calipers looked a little plain. These covers gave my Tesla the sporty finish I was looking for.”

Nikolas Fields

Verified customer

“I really like how well they blend with the car’s design. They look clean and professionally installed.”

BLACK FRIDAY
BLACK FRIDAY SALE

Teslahubs™ Aluminium Caliper Covers 

 For Tesla owners who want the Performance look — without the Performance price. 
Offer ends in: 00d 00h 00m 00s

BLACK FRIDAY — SAVE 55%

FAQs

Will this actually look like Performance calipers — or obviously fake? 

Tesla uses the same concept on its own Performance models. Aerospace aluminum, powder-coated finish, precision fit per model. The cover sits flush with no visible gaps. Indistinguishable from factory Performance calipers to anyone not specifically looking for it.

 Which Tesla models does this fit? 

Model 3, Model Y, Model S, and Model X. Each cover set is engineered to the exact caliper dimensions of your specific model — not a universal part that needs trimming or shimming. Select your model at checkout.

Can I remove them if I change my mind? 

Completely. The dual-clip system requires no adhesive, no drilling. Pull the clips — the cover comes off. No residue, no damage. Swap colors or remove them entirely whenever you want.

What's included in the box? 

4 caliper covers (labeled by wheel position), all mounting hardware, Loctite, installation tools, and access to the 30-minute video walkthrough. You need nothing else.

Won't brake heat damage the covers? 

Aerospace-grade aluminum handles brake heat loads — it's why Tesla uses this material on its own caliper covers, not plastic. The powder-coated finish is rated for high-temperature environments.

Does this affect my Tesla warranty or brake performance? 

No. The covers clip over the outside of the caliper — zero contact with brake components. Tesla warranty is unaffected. Brake performance is unchanged.

What if I'm not satisfied? 

30-day full refund, no questions. We pay return shipping. Install them, drive for a month. If you don't love the result, one email is all it takes.