The current ProGuard selector separates Model Y 2020–2024 from 2025–2027 Juniper. Check your build first, then match the fitting locations to the wind or gap noise you want to address.
See How ProGuard WorksNo tools needed · 15-min install · Worldwide shipping
The wrong variant can turn a simple fitting job into a frustrating afternoon. ProGuard currently lists a Model Y 2020–2024 version and a 2025–2027 Juniper version, both at $79.99.
If your vehicle version is unclear, ask TeslaHubs before ordering. Do not infer fit from a generic Model Y photo.
Then check the symptom you want to change:
Start with the location you want to address.
Use the fitting diagram and your vehicle version to choose the next step.
A universal strip needs the right profile, length and placement. A model-specific kit helps narrow those decisions, but you still need the exact variant and guide.
A strip that catches when you close a door needs a placement check. Do not force it or assume a poor fit is normal.
Likewise, one seller’s piece count cannot be compared directly with another’s. Review the actual locations, shapes and instructions.
ProGuard is one multi-location option, not the only one. Compare what comes with the selected kit and the support available for your vehicle.
Secondary seals sit at the contact areas described in the installation guide. That explains the product’s intended job without guessing why Tesla chose its original seal design.
The ProGuard listing describes six model-specific rubber strips. Identify each supplied piece and its intended position before fitting.
Three fitting checks:
Choose the exact vehicle version. Match the parts to the diagram for that version, rather than assuming every Tesla uses the same seals.
Check the covered locations. The listing identifies pillar, door, trunk and hood positions; use the selected kit diagram for exact placement.
Prepare the surfaces as instructed. Check closure after fitting and contact TeslaHubs if a piece or step is unclear.
See the full installation process
Watch the 15-Minute Installation
The quieter rides make long trips so much more enjoyable.
My car is the new model 3 Performance which is already very quiet compared to the previous model 3 but I still noticed an improvement with less road noise.
The kit arrived well-packed, and each part was labeled correctly. I scanned the QR code provided, and that made the install easier.
This is a great product and great service, thanks!
Compare current price, exact vehicle fit, supplied pieces and the guide. Another kit may cost less and may cover several locations too. A like-for-like comparison is more useful than assuming cheaper means wrong.
The current Model 3/Y price is $79.99. Choose it for the selected kit and support, not a claim that all other options require several purchases.
ProGuard adds secondary sealing at the covered locations. It does not replace every factory seal or establish that a factory fault is present.
Published reviewers report individual experiences. Those reports do not establish a typical decibel improvement or a guaranteed result for every car.
Plan around 15 minutes using the guide, with more time for surface preparation and any unclear placement.
Identify each piece before removing its adhesive backing.
Request a return within 30 days of delivery. Items must be unused, unworn, tagged and in their original packaging. Return shipping is customer-paid unless faulty or incorrect. Check eligibility before installation. ProGuard includes a 2-year product warranty; contact TeslaHubs about coverage and support.
Before placing your order:
Request a return within 30 days of delivery. Items must be unused, unworn, tagged and in their original packaging. Return shipping is customer-paid unless faulty or incorrect. Check eligibility before installation. ProGuard includes a 2-year product warranty.
30-day return window, eligibility applies · 2-year ProGuard warranty
56% off current pricing
Fix Your Tesla’s Sealing Problem TodaySelect the exact vehicle year and variant before ordering.