A Highland and an older Model 3 use different ProGuard variants. Start with your build year, then check whether wind at the door or pillar seams is the sound you want to change.
See How It WorksNo tools needed · 15-min install · Worldwide shipping
Your Model 3 Fit Check
You want the right pieces the first time. The current ProGuard selector lists Model 3 2019–2023 and Model 3 2024–2027 Highland versions, both at $79.99. Choose the option for your car.
If your build year is not listed, ask TeslaHubs before buying. Do not treat a broad Model 3 label as proof that every year shares the same fitting profile.
Then identify the sound. A whistle near a door or pillar is a different clue from rumble that changes with the pavement. A seal kit should match the location you want to address.
This page is a fit and installation guide from TeslaHubs, the seller of ProGuard. It does not diagnose every Model 3 noise as a factory sealing problem.
Wind at door and pillar seams: inspect fit and sealing at that location.
A rattle or sudden change: identify the component before buying a kit.
A whistle around roof glass: investigate the glass perimeter separately.
Dust on door sills: compare the covered areas and installation guide.
Rumble that changes with pavement: consider tire and road contribution.
Check a damaged factory seal, new rattle or water leak with Tesla before adding an accessory. For wind at a covered seam, compare the selected ProGuard diagram with your vehicle.
Choose the Right Kind of Fix
Two listings can both show a Model 3 while referring to different years or different sealing locations. Read the variant and the fitting diagram together.
A universal strip requires you to establish the right profile, position and fit. A model-specific kit narrows that choice, but you still need the correct year and installation instructions.
A roof seal addresses the glass perimeter. A multi-location kit addresses its listed seams. Some competing kits also include doors, pillars, trunk and frunk; do not assume ProGuard is the only one.
A service inspection is the right route for damaged factory seals or an unexplained new problem. Ask what repair is proposed and why, then compare an accessory only if it is appropriate.
Sound deadening works on vibration and transmission through panels. Secondary seals work at their contact areas. The job determines the method, not an assumption that every noise enters through one set of gaps.
The Model 3 and Highland Options
ProGuard’s current Model 3 variants are 2019–2023 and 2024–2027 Highland. The listing describes six tailored rubber strips and provides fitting guidance. Confirm each labeled piece before installation.
Three things to check in the kit:
Use the instructions for your selected Model 3 version. Do not substitute a Model Y diagram or assume a pre-refresh piece belongs in the same place on Highland.
Review the covered locations. The listing calls it a six-strip kit and lists pillar, door, trunk and hood positions. Follow the diagram for your selected car rather than counting every left/right label as a separate package promise.
Prepare the contact surface as directed. Clean, dry surfaces and correct placement matter for adhesion. Check door and hatch movement after fitting; do not force a closure if something is misplaced.
$179.99 → $79.99, 56% Off
Get Your ProGuard Kit, 56% OffWas $179.99 · Now $79.99 · Worldwide shipping
1,036 reviews. 4.5 out of 5 stars.
The quieter rides make long trips so much more enjoyable.
My car is the new model 3 Performance which is already very quiet compared to the previous model 3 but I still noticed an improvement with less road noise.
The kit arrived well-packed, and each part was labeled correctly. I scanned the QR code provided, and that made the install easier.
This is a great product and great service, thanks!
What These Reviews Can Tell You
| Published Reviewer | Useful Detail | What to Check |
|---|---|---|
| Sean Smith | Describes quieter long trips | Individual driving experience |
| Scott Kennedy | Reports improvement on a newer Model 3 Performance | Starting noise level matters |
| Flynnaz | Used the QR video and noted rear-hatch settling | Read fitting guidance and check closure |
These are individual product-review excerpts. They describe owner experiences, not a controlled test or a guaranteed decibel change on your car.
The current Model 3/Y price is $79.99 versus $179.99 compare-at. Choose it for the listed fit, installation guidance and support. Another multi-location kit may cost less; compare the actual parts and terms.
Request a return within 30 days of delivery. Items must be unused, unworn, tagged and in their original packaging. Return shipping is customer-paid unless the item is faulty or incorrect. Check eligibility before installation. ProGuard includes a 2-year product warranty.
Published reviews describe individual improvements. The most useful ones tell you the car, installation experience and what remained noisy. Read the current reviews before deciding; a review count is not a success rate.
Use the video/PDF guide, check the position of each seal, and prepare the surface before fitting. Plan around 15 minutes, with extra time if you need to confirm a part or placement.
| Compare | ProGuard | RPM Gen. 2 | Marketplace Kit | Abstract Ocean |
|---|---|---|---|---|
| Job | Model-specific secondary sealing | Multi-location sealing | Depends on exact kit | Roof-glass perimeter |
| Covered areas | See selected fitting diagram | Doors, pillars, trunk, frunk | Check seller diagram | Top glass panel |
| Price | From $79.99 | $56.36 listed; promotion varies | Check exact listing | $10 clearance |
| Fit | Choose exact model/year | Model 3/Y; check version | Check exact listing | Original Model 3/Y; no Highland |
| Installation | About 15 min; follow guide | Under 30 min per guide | Check instructions | Under 15 min per guide |
| Returns | Unused-item eligibility | Check current terms | Check seller terms | Final sale, no returns |
A kit is good value when it fits the car and addresses the sound you want to change. Compare the supplied locations and fitting guide before comparing piece counts.
Model 3 variants currently $79.99 · Check your build year and delivery estimate
Get ProGuard, Save 56% TodayCheck fit before installation and contact TeslaHubs if a part or instruction is unclear.
30-Day Return Window: Eligibility Applies
Plan around 15 minutes using the supplied guide. Allow time to identify the pieces and prepare the surfaces. Follow the current instructions for your exact vehicle.
The current Model 3 options are 2019–2023 and 2024–2027 Highland. If your year or vehicle version is unclear, ask TeslaHubs before ordering.
Read the installation and removal instructions before fitting. For vehicle-warranty circumstances, ask Tesla; do not assume every aftermarket installation receives the same treatment.
Compare the exact parts. A model-specific kit identifies supported vehicle versions and supplies shaped pieces with instructions. That does not prove every universal strip will fail or that every competing kit is generic.
Read the published product reviews for individual experiences. This guide does not promise a typical decibel reduction. The outcome depends on the car, installation and source of noise.
Request a return within 30 days of delivery. Items must be unused, unworn, tagged and in their original packaging. Return shipping is customer-paid unless the item is faulty or incorrect. Check eligibility before installation.
Was $179.99 → $79.99 Today
Get ProGuard, Save 56% TodayCurrent model-specific offer · Shipping estimate and return eligibility on the product page