Six model-specific strips for the door, pillar, trunk and hood contact points, fitted in about 15 minutes with no tools. 4.5 stars from 1,036 reviews, a 2-year warranty and 30-day returns.
Seal My Tesla's GapsNo tools needed · 15-min install · Worldwide shipping
You wipe the sill. One drive later it's gritty again. After a rainy night there's water sitting in the jamb, and when it pours the cabin sounds like a drum. That's the gap between the door and the body doing exactly what a gap does.
A damaged original seal or unexplained leak needs diagnosis. An added strip should not hide the problem or interfere with the way a door or hatch closes.
Use these checks before buying:
Start with the location you want to address.
Use the fitting diagram and your vehicle version to choose the next step.
A universal strip needs the right profile, length and placement. A model-specific kit helps narrow those decisions, but you still need the exact variant and guide.
A strip that catches when you close a door needs a placement check. Do not force it or assume a poor fit is normal.
Likewise, one seller’s piece count cannot be compared directly with another’s. Review the actual locations, shapes and instructions.
ProGuard is one multi-location option, not the only one. Compare what comes with the selected kit and the support available for your vehicle.
Secondary seals sit at the contact areas described in the installation guide. That explains the product’s intended job without guessing why Tesla chose its original seal design.
The ProGuard listing describes six model-specific rubber strips. Identify each supplied piece and its intended position before fitting.
Three fitting checks:
Choose the exact vehicle and build year. The product page lists separate Model 3, Highland, Model Y, Juniper, S, X and Cybertruck variants.
Check the covered locations. The listing identifies pillar, door, trunk and hood positions; use the selected kit diagram for exact placement.
Prepare the surfaces as instructed. Check closure after fitting and contact TeslaHubs if a piece or step is unclear.
See the full installation process
Watch the 15-Minute Installation
I also bought this to cut down on the dirt and dust in my door jams.
My car is the new model 3 Performance which is already very quiet compared to the previous model 3 but I still noticed an improvement with less road noise.
The rear hatch took a few tries to close to get settled.
The quieter rides make long trips so much more enjoyable.
Compare current price, exact vehicle fit, supplied pieces and the guide. Another kit may cost less and may cover several locations too. A like-for-like comparison is more useful than assuming cheaper means wrong.
The current Model 3/Y price is $79.99. Choose it for the selected kit and support, not a claim that all other options require several purchases.
ProGuard adds secondary sealing at the covered locations. It does not replace every factory seal or establish that a factory fault is present.
Published reviewers report individual experiences. Those reports do not establish a typical decibel improvement or a guaranteed result for every car.
Plan around 15 minutes using the guide, with more time for surface preparation and any unclear placement.
Identify each piece before removing its adhesive backing.
Request a return within 30 days of delivery. Items must be unused, unworn, tagged and in their original packaging. Return shipping is customer-paid unless faulty or incorrect. Check eligibility before installation. ProGuard includes a 2-year product warranty; contact TeslaHubs about coverage and support.
Before placing your order:
Up to 6X quieter on the highway, with up to 40% less road noise at highway speed. Owners who ran a phone sound-meter app before and after fitting ProGuard report readings like these:
| Measurement | Before ProGuard | After ProGuard |
|---|---|---|
| Highway (70 mph) | 78 dB | 65 dB |
| Heavy rain | 74 dB | 62 dB |
| City driving | 58 dB | 52 dB |
A 13 dB drop at highway speed is roughly the difference between a busy restaurant and a quiet office. ProGuard is backed by a 2-year product warranty.
Sound figures are customer-reported readings from third-party sound meter apps. Results vary by car, speed and road surface.
Request a return within 30 days of delivery. Items must be unused, unworn, tagged and in their original packaging. Return shipping is customer-paid unless faulty or incorrect. Check eligibility before installation. ProGuard includes a 2-year product warranty.
30-day return window, eligibility applies · 2-year ProGuard warranty
56% off current pricing
Fix Your Tesla’s Sealing Problem TodaySelect the exact vehicle year and variant before ordering.